Essay, Research Paper: Epoxy Resins

Engineering

Free Engineering research papers were donated by our members/visitors and are presented free of charge for informational use only. The essay or term paper you are seeing on this page was not produced by our company and should not be considered a sample of our research/writing service. We are neither affiliated with the author of this essay nor responsible for its content. If you need high quality, fresh and competent research / writing done on the subject of Engineering, use the professional writing service offered by our company.

The group of synthetic resins called epoxies produce the strongest adhesives in
current use, as well as plastics and corrosion-resistant coatings. Epoxy
adhesives are thermosetting; that is, after initial hardening, they cannot be
remelted by heat. They have excellent resistance to solvents and weathering
agents, and high electrical and temperature resistance. Their adhesion to almost
any type of surface--including metal, ceramic, wood, and fabric--is unmatched.
Epoxies are usually made by reacting epichlorohydrin and Bisphenol A to produce
a polymer chain of somewhat complex structure. The end of the polymer chain is
an epoxy group from epichlorohydrin; the resulting plastic receives its name
from the end epoxy group. The unmodified epoxies are brittle; however, the
properties of the cured resin can be varied widely by the selection of a
suitable resin, curing agent, filler, and curing procedure. Flexible grades are
modified with polyamines and polysulfides. Most epoxy formulations have two
components that are mixed for curing. One-component epoxies are available that
either contain a latent curing agent or are simply cured by absorption of oxygen
from the air. Unlike most thermosetting plastics, epoxies shrink only slightly
during curing. Epoxies can be used as filler-adhesives; the strength of the
cemented joint is independent of its thickness. The epoxies are used as molding
and potting compounds, reinforced plastics, surface finishes, and adhesives.
Molding compounds are chiefly used by the electronic and electrical industries;
potting compounds are poured to encapsulate small electronic parts. Epoxy paints
have outstanding corrosion resistance and are permitted for use on food
equipment such as flour bins and can coatings. Large and complex dies for the
forming of metal sheet are made of epoxy and are often modified with powdered
metal such as aluminum. Uses in construction include the repair and bonding of
concrete and also epoxy terrazzo floors. Adolf Hitler

Bibliography
Lee, Henry, ed., Epoxy Resins (1970); Hilado, Carlos J., Carbon Reinforced
Epoxy Systems (1984).

0
0
Good or bad? How would you rate this essay?
Help other users to find the good and worthy free term papers and trash the bad ones.
Like this term paper? Vote & Promote so that others can find it

Get a Custom Paper on Engineering:

Free papers will not meet the guidelines of your specific project. If you need a custom essay on Engineering: , we can write you a high quality authentic essay. While free essays can be traced by Turnitin (plagiarism detection program), our custom written papers will pass any plagiarism test, guaranteed. Our writing service will save you time and grade.




Related essays:

3
0
Engineering / Genetic Engineering 
A girl is born without Tay-Sachs disease, a devasting genetic disorder that has decimated a lot of babies worldwide. A leukemia patient has defective bone marrow replaced with healthy bone marrow that...
9290 views
0 comments
1
0
Geographical Information System originated in the 1960s. During the early days of the technology the use was limited to a small group of practicioners. It is a information technology which analizes, s...
4270 views
0 comments
0
1
What is GPS? The global positioning system is a satellite-based navigation system, developed and operated by the U.S. Department of Defence, consisting of a network of 24 orbiting satellites that are ...
4438 views
0 comments
0
1
Engineering / Granville Woods
African-American inventors have gotten little recognition for their accomplishments. Indeed, it was hard to find information to even write a small report on a single one of them. However, although th...
4850 views
0 comments
0
0
Engineering / Hydrology
Dealing with the natural resources of our environment, both in management capacities for present needs and safety and in planning for the future available resources, is the responsibility of water res...
5015 views
0 comments